Your Slice Isn't the Club's Fault (But Here's the Gear That Hides It)

Your Slice Isn't the Club's Fault (But Here's the Gear That Hides It)

Your Slice Isn't the Club's Fault (But Here's the Gear That Hides It)

Tough love, then practical help. No driver cures a slice — but the right loft, head and setup can shrink one enough to keep you in play while you fix the real cause.

Browse Used Drivers →


We could sell a lot of "anti-slice" drivers by telling you the club is the problem. It isn't. A slice is a face-to-path issue — the face pointing right of the direction you're swinging — and it lives in your hands, not the hosel. But here's the honest middle ground the marketing wars skip: while gear can't cure a slice, it absolutely can shrink one. Here's what actually helps, ranked by how much.


What Actually Reduces a Slice (Ranked Honestly)

Fix Effect Honest rating
Lessons on face control Fixes the actual cause The cure — nothing on this table competes
More loft Extra backspin suppresses sidespin — the ball curves visibly less at 12° than 9° The most underrated gear fix in golf; see our loft guide
Draw-biased / adjustable head settings Moving weight to the heel and setting the hosel to draw genuinely shifts start line and curve a meaningful amount Real help — most used drivers from the past decade already have the adjustability; you may own the fix already
Softer/lighter shaft that fits A too-stiff shaft leaves the face hanging open; correct flex helps it square Meaningful for the many slicers playing "Stiff" out of optimism
A brand-new "anti-slice" driver Bundles the loft/bias/shaft effects above into one purchase at full retail Works — but you can assemble the same effects used for half the price

The Used-Market Slice Kit

  • A forgiving Max-style head one or two generations back — high MOI keeps heel strikes (the classic slicer's miss) from being punished twice.
  • 10.5° set to 12° via the adjustable hosel, draw setting on.
  • Regular or soft-stiff shaft matched to your actual speed — this is where Japanese-market gear quietly shines, since JDM shafts run softer and suit the moderate-speed swings most slicers have. Our shaft flex guide has the chart.
  • The money you saved → two or three lessons. That's the part that makes the slice actually leave instead of hiding.

💡 The line we won't cross: we'll sell you the kit above happily — it works. We won't tell you a driver cures a slice, because then you'd be back in a year buying the next "cure," and we'd rather you come back for a fairway wood because your drives finally found the short grass.


Why Buy From Us

Every driver we sell lists exact loft, adjustability, shaft model and flex — the three things a slicer actually needs to check — graded under our published grading system. Tell us your ball flight and we'll point at the right head honestly.


Shop Forgiving Used Drivers — Australia-Wide Shipping
Professionally graded. $30 flat rate shipping. Free over $600.

Browse Used Drivers →


The Bottom Line

Gear shrinks a slice; only you cure it. Buy the loft, the bias and the shaft used, spend the savings on the swing — and stop paying full retail for a promise no club can keep.

Honest prices, quality gear. Simple.